Universal Remote Control 10IN1 Manuel d'instructions télécharger pdf (Page 6)

After Sales Support

Telephone: 1300 663 907

Internet: www.winplus.com.au

After Sales Support

Telephone: 1300 663 907

Internet: www.winplus.com.au

5 22

Getting Started

In this manual, the remote control keys are represented

in capital letters, followed by a number in brackets that

represents the key number. Key numbers are shown in

the next section, remote control keys.

For example:

OK (22)

Messages displayed on the remote control’s screen are

represented in squared brackets.

For example:

[CODE SETUP]

More detailed information or warnings are shown in a

shaded box.

Information ﬁ eld example:

Here you’ll ﬁ nd more detailed information

or warnings.

Remote control keys

1 17

Erasing Favourites

1. Press and hold the SET button (21) for at least 3 seconds.

The display shows [CODE SETUP].

2. Then release the SET button (21).

3. Press

(8) four times. The display shows [FAV CH].

4. Press the OK button (22). The display shows [SETUP].

5. Press

(8). The display shows [DEL ALL].

6. Press the OK button (22). The display shows [SURE DELET].

7. Press the OK button (22). The message [DELETED] will

appear for a few seconds and the device returns to the

[SETUP] level.

8. Quit the process by pressing the EXIT button (23) twice.

Backlight

1. Press the LIGHT button (17) to switch on the backlight

illumination. The backlight illumination will switch off after

a preset delay.

2. If you wish to switch off the backlight before the preset

delay, press the LIGHT button again. This will switch off

the backlight.

Backlight Delay Time

1. Press and hold the SET button (21) for at least 3 seconds.

The display shows [CODE SETUP]. Then release the

SET button (21).

2. Press

(8). The display shows [CONFIGURE].

3. Press the OK button (22). The display shows [TIME SETUP].

4. Press

(8). The display shows [LIGHT-TIME].

5. Press the OK button (22). The present backlight delay

time (in seconds) will appear.

6. Press

or (8) to select a different time. You can choose

a value of 3, 5, 10 or 15 seconds. Choosing “00” will

disable the backlight illumination.

7. Press the OK button (22). The message [SUCCESS] will

appear for a few seconds and the device returns to the

[LIGHT-TIME] level.

8. Quit the process by pressing the EXIT button (23) twice.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

Commentaires sur ces manuels

Pas de commentaire

Universal Remote Control 10IN1 Manuel d'instructions Page 6

Commentaires sur ces manuels

Produits connexes et manuels pour Télécommandes Universal Remote Control 10IN1