Universal Remote Control 10IN1 Manuel d'instructions télécharger pdf (Page 5)

After Sales Support

Telephone: 1300 663 907

Internet: www.winplus.com.au

After Sales Support

Telephone: 1300 663 907

Internet: www.winplus.com.au

23 4

Product Use

This product is designed to control up to 10 AV devices using

one remote control. The remote control can replace your

old remote controls, using the learning function to mimic

their exact function. The extensive code library features

most common models of DVD players, TVs, and CD players,

allowing you to quickly program the universal remote for your

particular AV setup.

Product Features

• Controls up to 10 devices – replace up to 10 remotes with

just one device.

• Extensive pre programmed code library – the remote

control already knows how to control most common

devices including all Aldi speciﬁc AV devices.

• Learning function – learns the behaviour of remotes which

are not featured in the code book.

• Backlit LCD display – easily see which device is selected,

and what functions are active.

• Backlit keypad – see the keys in the dark.

Setting the Time

The time is shown on the remote control display. You can set

it as follows:

1. Press and hold the SET button (21) for at least 3 seconds.

The display shows [CODE SETUP]. Then release the SET

button (21).

2. Press (8). The display shows [CONFIGURE].

3. Press the OK button (22). The display shows [TIME

SETUP].

4. Press the OK button (22). The display shows [TIME]. The

day of the week and the set time will be displayed. The

day of the week blinks.

5. Press (8) to select the desired day of the week.

6. Press (8). The ﬁrst digit of the time will start blinking.

7. Enter the time via the numeric keys (3). Press or (8)

to toggle between the digits. The currently-selected digit

blinks.

8. Press or to select between AM (before noon) and

PM (afternoon).

9. Press the OK button (22). The message [SUCCESS] will

appear for a few seconds and the device returns to the

[TIME SETUP] level.

10. Quit the process by pressing the EXIT button (23) twice.

Calculator

The remote control includes a calculator for basic arithmetic.

Proceed as follows to use the calculator:

1. Press and hold the SET button (21) for at least 3 seconds.

The display shows [CODE SETUP]. Then release the

SET button (21).

2. Press (8) once. The display shows [CALCULATOR].

3. Press the OK button (22). The display shows a zero.

4. Enter the ﬁrst number via the numeric keys (3). The

number cannot exceed 10 digits.

5. Use the EXIT button (23) to erase the last entered digit.

6. Use the arrow buttons (8) to enter one of the four basic

arithmetic operations. The corresponding sign will appear

after the entered number.

You can choose one of the following operations:

Addition

Subtraction

Division

Multiplication

7. Enter the second number via the numeric keys (3).

The number cannot exceed 10 digits.

1 2 3 4 5 6 7 8 9 10 ... 13 14

Commentaires sur ces manuels

Pas de commentaire

Universal Remote Control 10IN1 Manuel d'instructions Page 5

Commentaires sur ces manuels

Produits connexes et manuels pour Télécommandes Universal Remote Control 10IN1