Universal Remote Control URC-WR7 Spécifications télécharger pdf (Page 15)

Page | 14

Set-up using the

Learning Method

STEP 1: Line up the WR7 to the remote control

you want to “learn” from, head-to-head as shown

below. Start with the two remotes' infrared (IR)

window touching, or nearly touch.

STEP 2: On the WR7, press the Component

button that you want to set up and the ENTER [ENT]

button at the same time. Hold down both buttons

for two seconds until the Component button light

turns on. This signals that you are in set up mode.

STEP 3: Press any button on the WR7 that you

want to teach a command to. For example, if you

want to teach the [MUTE] button on the WR7 the

TV Mute command from the other remote, first

press the [MUTE] button on the WR7. The TV

Component button light will blink once indicating

that the WR7 is ready to learn the command.

STEP 4: Press and hold the appropriate button on

the other remote until the component button light

on the WR7 blinks twice. This indicates the WR7

has learned the command from your other remote.

Didn’t work? Tap and release the button on your

old remote instead of pressing and holding the

button down See other tips on page 16.

ENTER

BUTTON

COMPONENT

BUTTONS

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 51 52

Pas de commentaire

Universal Remote Control URC-WR7 Spécifications Page 15