Universal Remote Control R7 - SPECS SHEET Manuel d'utilisateur Page 44
- Page / 52
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ADP5589 Data Sheet
Rev. B | Page 44 of 52
Bits Name R/W Description
[2: 0] LOGIC2_SEL[2:0] R/W Configures the digital mux for Logic Block 2.
000 = off/disable.
001 = AND2.
010 = OR2.
011 = XOR2.
100 = FF2.
101 = IN_LA2.
110 = IN_LB2.
111 = IN_LC2.
LOGIC_FF_CFG Register 0x46
Table 78. LOGIC_FF_CFG Bit Descriptions
Bits Name R/W Description
[7: 4] R/W Reserved.
3 FF2_SET R/W 0 = FF2 not set in Logic Block 2.
1 = set FF2 in Logic Block 2.
2 FF2_CLR R/W 0 = FF2 not cleared in Logic Block 2.
1 = clear FF2 in Logic Block 2.
1 FF1_SET R/W 0 = FF1 not set in Logic Block 1.
1 = set FF1 in Logic Block 1.
0 FF1_CLR R/W 0 = FF1 not cleared in Logic Block 1.
1 = clear FF1 in Logic Block 1.
LOGIC_INT_EVENT_EN Register 0x47
Table 79. LOGIC_INT_EVENT_EN Bit Descriptions
Bits Name R/W Description
[7: 6] R/W Reserved.
5 LY2_DBNC_DIS R/W 0 = output of Logic Block 2 is debounced before entering the event/interrupt block.
1 = output of Logic Block 2 is not debounced before entering the event/interrupt block. Use
with caution because glitches may generate interrupts prematurely.
4 LOGIC2_EVENT_EN R/W 0 = LY2 cannot generate interrupt.
1 = allow LY2 activity to generate events on the FIFO.
3 LOGIC2_INT_LEVEL R/W Configure the logic level of LY2 that generates an interrupt.
0 = LY2 is active low.
1 = LY2 is active high.
2 LY1_DBNC_DIS R/W 0 = output of Logic Block 1 is debounced before entering the event/interrupt block.
1 = output of Logic Block 1 is not debounced before entering the event/interrupt block. Use
with caution because glitches may generate interrupts prematurely.
1 LOGIC1_EVENT_EN R/W 0 = LY1 cannot generate interrupt.
1 = allow LY1 activity to generate events on the FIFO.
0 LOGIC1_INT_LEVEL R/W Configure the logic level of LY1 that generates an interrupt.
0 = LY1 is active low.
1 = LY1 is active high.
POLL_TIME_CFG Register 0x48
Table 80. POLL_TIME_CFG Bit Descriptions
Bits Name R/W Description
[7: 2] Reserved.
[1: 0] KEY_POLL_TIME[1:0] R/W Configure time between consecutive scan cycles.
00 = 10 ms.
01 = 20 ms.
10 = 30 ms.
11 = 40 ms.
- ADP5589 1
- TABLE OF CONTENTS 2
- SPECIFICATIONS 3
- ABSOLUTE MAXIMUM RATINGS 5
- QUICK DEVICE OVERVIEW 7
- 9714-004 7
- DEVICE ENABLE 8
- DEVICE OVERVIEW 8
- EVENT FIFO 9
- KEY SCAN CONTROL 9
- Rev. B 10
- KEY PRESSED 10
- 09714-009 10
- Data Sheet ADP5589 11
- ADP5589 Data Sheet 12
- Key Pad Extension 12
- Ghosting 12
- FIFO Lock/Unlock 12
- GPI Input 15
- REGISTER INTERFACE 19
- REGISTER MAP 21
- ID Register 0x00 23
- INT_STATUS Register 0x01 23
- Status Register 0x02 23
- FIFO_1 Register 0x03 24
- Rev. B 25
- Rev. B 26
- GPI_INT_STAT_A Register 0x13 27
- GPI_INT_STAT_B Register 0x14 27
- GPI_INT_STAT_C Register 0x15 27
- GPI_STATUS_A Register 0x16 28
- GPI_STATUS_B Register 0x17 28
- GPI_STATUS_C Register 0x18 28
- RPULL_CONFIG_A Register 0x19 29
- RPULL_CONFIG_B Register 0x1A 29
- RPULL_CONFIG_C Register 0x1B 30
- RPULL_CONFIG_D Register 0x1C 30
- RPULL_CONFIG_E Register 0x1D 31
- GPI_EVENT_EN_A Register 0x21 32
- GPI_EVENT_EN_B Register 0x22 33
- GPI_EVENT_EN_C Register 0x23 33
- DEBOUNCE_DIS_A Register 0x27 35
- DEBOUNCE_DIS_B Register 0x28 35
- DEBOUNCE_DIS_C Register 0x29 36
- GPO_DATA_OUT_A Register 0x2A 36
- GPO_DATA_OUT_B Register 0x2B 36
- GPO_DATA_OUT_C Register 0x2C 37
- GPO_OUT_MODE_A Register 0x2D 37
- GPO_OUT_MODE_B Register 0x2E 37
- GPO_OUT_MODE_C Register 0x2F 38
- UNLOCK1 Register 0x33 39
- UNLOCK2 Register 0x34 39
- EXT_LOCK_EVENT Register 0x35 39
- UNLOCK_TIMERS Register 0x36 40
- LOCK_CFG Register 0x37 40
- RESET1_EVENT_A Register 0x38 40
- RESET1_EVENT_B Register 0x39 40
- RESET1_EVENT_C Register 0x3A 41
- RESET2_EVENT_A Register 0x3B 41
- RESET2_EVENT_B Register 0x3C 41
- RESET_CFG Register 0x3D 41
- PWM_OFFT_LOW Register 0x3E 42
- PWM_OFFT_HIGH Register 0x3F 42
- PWM_ONT_LOW Register 0x40 42
- PWM_ONT_HIGH Register 0x41 42
- PWM_CFG Register 0x42 42
- CLOCK_DIV_CFG Register 0x43 43
- LOGIC_1_CFG Register 0x44 43
- LOGIC_2_CFG Register 0x45 43
- LOGIC_FF_CFG Register 0x46 44
- POLL_TIME_CFG Register 0x48 44
- PIN_CONFIG_A Register 0x49 45
- PIN_CONFIG_B Register 0x4A 45
- PIN_CONFIG_C Register 0x4B 45
- PIN_CONFIG_D Register 0x4C 46
- GENERAL_CFG_B Register 0x4D 46
- INT_EN Register 0x4E 47
- APPLICATION DIAGRAM 48
- OUTLINE DIMENSIONS 49
Produits connexes et manuels pour Télécommandes Universal Remote Control R7 - SPECS SHEET
(52 pages)
(319 pages)© 2020, manymanuals.fr. Tous droits réservés | 0.068 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels