Universal Remote Control ATLAS 5-DEVICE Manuel d'utilisateur télécharger pdf (Page 13)

www.urcsupport.com

Learning Precautions

• Your original remote controls must be in working

order for learning to work properly.

• Learned keys are mode-specific, so each one can

store a unique function for each mode.

• Do not use the following keys for learning: Device

Keys, SETUP, Record (•), Tune-In Keys.

• Learning capacity is approximately 16 to 25 keys,

depending on the code being learned.

• Certain device functions are not learnable including

multi-frequency types, some high frequency ones,

and other unusual formats.

• For optimum learning, avoid high levels of ambient

light such as natural sunlight or energy-efficient

fluorescent lights.

NOTE: Please have your original remote controls

handy before programming learning.

Programming a Learned Key

NOTE: If more than 15 seconds pass between key

presses, the remote exits programming.

3. Place the Atlas DVR/PVR 5-Device Universal

Remote Control with Learning head-to-head

(about 2" apart) from your original remote

control. Also locate the key (on your original

remote control) that you want the Atlas DVR/

PVR 5-Device Universal Remote Control with

Learning to learn.

1. Press and hold SETUP until the last-selected

mode key blinks twice, then press 9 7 5.

NOTE: If the LED displays one long flash instead,

either your batteries are low, or the Atlas DVR/

PVR 5-Device Universal Remote Control with

Learning has a memory fault. In either case,

the remote will not learn a new key. See “Addi-

tional Information” on page 24.

2. Press a mode key once (i.e., AUX, DVD, AUD,

TV, or CBL) to assign a mode for learning, then

the key that will learn the new code.

Atlas M11055 Rev 2.fm Page 13 Thursday, September 22, 2005 12:55 PM

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 71 72

Pas de commentaire

Universal Remote Control ATLAS 5-DEVICE Manuel d'utilisateur Page 13