Universal Remote Control R5 Manuel du propriétaire Page 25
- Page / 56
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
23
URC-100
The Optional Expander
You can use the Unifier as you would your other
remote controls. It transmits very powerful line-of-sight
output using infrared light commands (invisible to the
naked eye). When you point the Unifier at the
components, expect the range to be between 30 and
50 feet. When the remote is not pointed in the general
direction of the components, the range will vary
(depending on reflective surfaces, lighting, etc.).
However, the Unifier also sends radio signals in
every direction. By purchasing the optional Expander
(a radio receiver), you can operate your equipment
with the Unifier 50 to 100 feet away (through walls,
doors, cabinets, inside or outside). Since the
Expander picks up the Unifier's radio signals from
any direction, regardless of distance, the Unifier
doesn’t have to be pointed!
Nothing has to be done to the Unifier for this
feature to work. Every time you press a button on the
Unifier, it sends both a standard infrared command
AND a radio signal. If you install the Expander kit, the
MRF-100 will receive the Unifier’s radio signals and
translate them into the infrared commands that control
your components.
Note: The Unifier's radio signals will not control
components directly. You must have an Expander to
receive the Unifier's radio signals. Components
that came with "no pointing" radio remote controls cannot
be operated by the Unifier unless the component can
be switched to standard infrared control via its internal
menus. Some remote control ceiling fans are radio only and
cannot be operated by the Unifier.
- Thank You! 2
- Table of Contents 3
- Getting Started 4
- Button Layout 5
- Basic Setup 7
- The Unifier 10
- Learning Method 10
- Volume Control Punch Through 13
- Advanced Setup 15
- Editing Device Names 17
- Macro Button Setup 19
- Overview of Erasing 21
- Erasing One Learned Command 21
- Erasing a Macro 23
- Erasing All Settings 24
- The Optional Expander 25
- Pre-Programmed Code Tables 27
- AUDIO COMMAND LOCATIONS 30
- CD - CD Players and Changers 31
- CD COMMAND LOCATIONS 33
- DVD COMMAND LOCATIONS 35
- AUX - Tape Decks 36
- AUX COMMAND LOCATIONS 37
- SAT - Satellite Receivers 38
- SAT COMMAND LOCATIONS 40
- TV COMMAND LOCATIONS 43
- VCR COMMAND LOCATIONS 46
- CBL - Cable TV and Web TV 47
- CABLE COMMAND LOCATIONS 48
- Frequently Asked Questions 50
- Warranty 52
- Specifications 52
- OCE-0023A Rev. 05 56
Produits connexes et manuels pour Télécommandes Universal Remote Control R5
(26 pages)
(9 pages)
(32 pages)Clay Paky GOLDEN SCAN HPE (HMI 1200) manuals
Owner’s manuals and user’s guides for Lighting Clay Paky GOLDEN SCAN HPE (HMI 1200).
We providing 5 pdf manuals Clay Paky GOLDEN SCAN HPE (HMI 1200) for download free by document types: User Manual
Commentaires sur ces manuels