Universal Remote Control MRZ-260 - SPECS SHEET Manuel d'installation télécharger pdf (Page 4)

Page 1

MRZ-260 BASE STATION

Introduction

The MRZ-260 base station is an “addressable” base station. MAC

addressing gives you the ability to use an unlimited amount of MRZ-

260’s and allows the control of many identical components as needed

throughout the house. The MRZ-260 is only compatible with 2.4

GHz remote controls (Z remotes) such as the MX-880Z.

3. Self-adhesive “Flashers” affix to

the Infrared sensors on the front pan-

els of your components. The

Flashers relay commands to compo-

nents out of sight of the MRZ-260

Front Blaster. The flashers plug in to

the MRZ-260 rear flasher line out-

puts via their 10 foot cables.

Uniquely, the MRZ-260 can also

connect to components with rear

panel IR Inputs via its adjustable IR

Line Outputs.

2. The MRZ-260 built-in Front Blaster sends commands to com-

ponents in the same cabinet space or you can use flashers.

1. The MX-880Z sends radio

waves in every direction, so you

don’t have to point the remote

anymore!

1 2 3 4 5 6 7 8 9 ... 19 20

Pas de commentaire

Universal Remote Control MRZ-260 - SPECS SHEET Manuel d'installation Page 4