Universal Remote Control PSX-2 Manuel d'installation télécharger pdf (Page 6)

PSX Installation Manual (PSX-1 and PSX-2) ver. 1.1

Reset

The Reset screen is used to “Reboot” the PSX or “Reset” it to its factory default

configuration.

Firmware Update

The Firmware Update screen is used to upload new firmware to the PSX. The

firmware must be downloaded to a connected PC before it can be loaded into the

PSX. Use the browse button to locate the latest firmware file, and then click on

the” Firmware Update” button. The latest firmware is automatically installed in

CCP. Simply browse to the .bin file in this folder:

For PSX-2 C:\Program Files\Universal Remote Control, Inc\Complete Control

Program\Tools\PSX-2\PSX-2 Firmware

For PSX-1 C:\Program Files\Universal Remote Control, Inc\Complete Control

Program\Tools\PSX-1\PSX-1 Firmware

Now click on the Firmware Update button. The PSX will download the file, install

and restart automatically. Then PSX Setup will display the following message:

1 2 3 4 5 6 7 8 9 10 11 ... 16 17

Pas de commentaire

Universal Remote Control PSX-2 Manuel d'installation Page 6