Universal Remote Control RNC-200 Manuel d'utilisateur

All rights reserved – 1CMP/Gr 09/2004 – 1CM56_E Version 1.0 Products: R&S CMU300, NetHawk RNC/Iub Simulator Testing the Ericsson® Node B Ty

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 10 Rohde & Schwarz • Carry out modulation analysis. The RMS values of the error vector ma

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 11 Rohde & Schwarz • To select the CDP measurement unit use softkeys Code Dom. Power / Uni

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 12 Rohde & Schwarz • Set the starting output level to –70 dBm (Generator Level / Total T

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 13 Rohde & Schwarz Storing the measurement results You can use the R&S CMU300 to save m

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 14 Rohde & Schwarz 7 References [1] 3GPP TS 25.141 Technical Specification, 3rd Generatio

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 15 Rohde & Schwarz 9 Additional Information The solution presented here corresponds to the

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 16 Rohde & Schwarz Amendment History Version Filename Editor Comments 1.0 1CM56_E R&a

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 2 Rohde & Schwarz Table of Contents 1 Overview ...

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 3 Rohde & Schwarz 2 Operating Principle RF TesterR&S CMU300Node BEricsson RBS3202NetHa

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 4 Rohde & Schwarz 3 Hardware and Software Requirements Configuration of measurement compon

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 5 Rohde & Schwarz 4 Test Setup Please create the test setup according to the following blo

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 6 Rohde & Schwarz 5 Test Sequence The following description of the test sequence assumes b

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 7 Rohde & Schwarz Activation of the RF power can be monitored with the aid of the spectrum

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 8 Rohde & Schwarz Transmitter measurements R&S CMU300: • Start the function group 3G U

RBS3202 Test with CMU300 and RNC/Iub SIM 1CM56_E 9 Rohde & Schwarz • softkey Analyzer Settings: Set the DL frequency or channel number to